Post Reply 
Submit a Linux DroboApp
08-07-2009, 02:38 PM (This post was last modified: 08-07-2009 02:44 PM by Data Robotics.)
Post: #1
Submit a Linux DroboApp
Post information on your new/revised Linux DroboApps in this tread (Click on New Reply instead of using the quick reply to enable attachments). Please be patient as we review and approve your DroboApp submission in the order that they are received.

Messages in this thread will not display. They will be moved to the "Downloads" forum when approved.
Find all posts by this user
Quote this message in a reply
12-14-2011, 03:00 PM
Post: #2
RE: Submit a Linux DroboApp
I've recently compiled and configured apcupsd for my drobofs because we've had a spate of bad power outages recently.

This is version 3.14.10 from http://www.apcupsd.org/

I've disabled all communications types except for network, and tweaked the configuration and support files so that they work within the DroboApps world.

Announcement is here: http://www.drobospace.com/forums/showthr...http://www.drobospace.com/forums/showthread.ph

GPG info:
pub 1024D/08BEEDA8 2008-08-19
Key fingerprint = 1E3E 9937 804A 5948 5328 CE94 9599 700F 08BE EDA8
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump: